PRE-PAINTED ALUMINUM-ZINC ALLOY-COATED STEEL SHEET

( No review posts yet )

The application of the leading technology of coating on Aluminum-zinc alloy-coated steel sheet enables it to paint two identical surfaces in order to increase aesthetics, diversity of colors, high durability which make the product durability outstanding, ensure high quality under: JIS G 3322 (Japan), ASTM/A755 A755M (United States), AS 2728 (Australia), EN 10169 (Europe), MS 2383 (Malaysia) standards.

Coil Width :

750 ~ 1250 mm

Thickness :

0.117 ÷ 1.2 mm

Coating mass :

AZ030 ÷ AZ200
Guidelines for perfomance and maintanance of

optional to purchase any other product

- Outstanding corrosion resistance

- Diversified colors

 

Standard

JIS G3322

Base metal thickness

0.117 ÷ 1.2mm

Width

750 ÷ 1250mm

Coil I.D

508, 610mm

Bending

0T ÷ 3T

Gloss

15 ÷ 85%

Pencil hardness

≥ 2H

Adhesion

No peeling

Top side paint thickness

15 ÷ 25µm

Back side paint thickness

5 ÷ 25µm 

Solvent Resistance

MEK ≥ 100 DR

Reverse Impact test

No peeling

Coating mass

AZ030 ÷ AZ200

Salt spray test

Top side: Min. 500 hours

Back side: Min. 300 hours

Colors

Meet customer requirements.

 

              Note: Other specifications or requirements are subject to between Hoa Sen Group and customers .

 

Corrugated  forming:

-       Adjust the gap of rollers to fit in steel sheet thickness.

-       Rollers and forming rolls should be cleaned before corrugated forming.

-       Select steel sheet with an appropriate hardness and tensile strength when processing, especially in Klip Lock, Seam Lock, roof tiles, purlin or gutter roll forming.

-       Do not use lubricant for corrugated forming.

-       Should not roll steel sheet with too small radius because it can cause crack to the protective coating layers of the steel sheet .

Installation:

-       Wear soft-soled shoes when  moving on the roof in order to avoid scratching. Move softly on the steel sheet roof with the entire foot and on the location of screws with rafters and roof.

-       The fasteners used to fix cladding and accessory materials have the same or superior service life as the Hoa Sen product with which they are to be used. The rubber washer component of self-drilling screws must be manufactured from materials compatible with the roofing, walling and accessory material.

-       Use neutral Silicon sealant to have good adhesion.

-       Use natural pine oil or white shell oil and dry towels to clean the surface to apply adhesive.

-       The roof should be immediately cleaned to remove steel debris, rivets and other discarded steel objects after installation.

Apply the leading technology of coating on Aluminum-zinc alloy-coated steel sheet on the advanced production technology line of Japan.

 

  • 1 What are the payment terms?

    -       Telegraphic Transfer

    -       L/C at sight

  • 2 What is our lead time?

    Lead time: 30 days from the date we receive your LC.

  • 3 What is Hoa Sen’s claim policy?

    We commit to solve any arising claim.

  • 4 Where do Hoa Sen’s raw material sources originate from?

    We import our raw materials from various sources including: Japan, Korea, Taiwan, Russia, Brazil, India, China,…

  • 5 What is Hoa Sen’s warranty policy?

    -    We provide the following warranties:

    ·        10 years warranty for 55% Aluminum-Zinc Alloy Coated and Prepainted Hot Dip 55% Aluminum-Zinc Alloy Coated Steel Sheet with coatings AZ100 and AZ150

    ·        10 years warranty for Prepainted Hot Dip Zinc Coated Steel Sheet with coating Z180 and above

  • 6 Application of coated steel sheet?

    Coated steel sheet has a wide range of applications in many areas:

    -       Residential application: roofing, wall cladding, plafond, gutters, fringing …

    -       Commercial construction / Projects: rolling shutters, floordeck, PU insulation panels, sound insulation …

    -       Industrial production: ventilation system, handicrafts, interior decoration …

  • 7 The advantages of Hoa Sen Group’s Coated Steel Sheet in Coil?

    -       Effective corrosion resistance

    -       High aesthetics

    -       Quality commitment

    -       Fast delivery

    -       Good aftersales service

  • 8 The technology of Hoa Sen Group’s Coated Steel Sheet in Coil?

    Hoa Sen’s Aluzinc/ Zinc coating lines with the NOF technology meet the strict quality and environmental friendly.

  • 9 Means of transporation for export?

    -       By container vessel

    -       By bulk vessel

    -       By barge

    -       By truck

  • 10 The steel standards of Hoa Sen Group’s Coated Steel Sheet in Coil?

    -       JIS (Japanese standard): JIS G3302:2012, JIS G3321:2012

    -       ASTM (American standard): ASTM A653/A653M:2015, ASTM A792/A792M:2015

    -       BS EN (European and British standard): BS EN 10346:2015

    -       SNI (Indonesia standard): SNI 07-2053:2006, SNI 4096:2007

    -       SIRIM (Malaysia standard): MS 2385:2011, MS 2384:2011, MS 1196:2014

    -       AS (Australia standard): AS 1397:2011

    -       IS (Indian standard): IS 277:2003, IS 15961:2012

customer has assessed

( No review posts yet )

your comment on this product

Please login to review

featured comment